the modem is connected to the aux,but after the s0 is down,the modem doesnot
dial,why?
the following is the config:
Router#show conf
Using 2413 out of 29688 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
enable secret 5 $1$aStq$3UYrVYPDvQrw4Bg.eB3Qn1
enable password cisco
!
username guest password 0 guest
username delta password 0 delta
username test1 password 0 cisco
!
!
!
!
memory-size iomem 25
ip subnet-zero
no ip domain-lookup
ip host modem 2002 192.168.3.10
ip dhcp excluded-address 192.168.3.10
ip dhcp excluded-address 192.168.3.190 192.168.3.200
ip dhcp excluded-address 192.168.3.1 192.168.3.10
!
ip dhcp pool delta
network 192.168.3.0 255.255.255.0
dns-server 210.78.28.29
default-router 192.168.3.10
netbios-name-server 192.168.2.1
netbios-node-type h-node
lease 5
!
ip address-pool local
chat-script zhongda "" "AT" TIMEOUT 30 OK "ATDT 1626053313501773113" TIMEOUT
30 CONNECT \c
!
!
!
interface Serial0
backup delay 5 30
backup interface Async5
ip address 1.1.1.2 255.0.0.0
encapsulation ppp
no fair-queue
!
interface Serial1
physical-layer async
ip address 3.3.3.3 255.255.255.0
encapsulation ppp
keepalive 10
dialer in-band
dialer idle-timeout 300
dialer map ip 3.3.3.5 name test1 modem-script zd broadcast 8537
dialer-group 1
async default routing
async mode dedicated
pulse-time 1
!
interface FastEthernet0
ip address 192.168.3.10 255.255.255.0
speed auto
!
interface Async5
ip address 3.3.3.1 255.255.255.0
encapsulation ppp
dialer in-band
dialer wait-for-carrier-time 60
dialer map ip 3.3.3.2 name routerb modem-script zhongda
dialer-group 1
async dynamic address
async dynamic routing
async mode dedicated
pulse-time 1
ppp authentication pap
!
ip local pool default 192.168.3.200 192.168.3.210
ip classless
ip route 172.18.76.0 255.255.252.0 1.1.1.1
ip route 192.168.2.0 255.255.255.0 1.1.1.1
ip route 192.168.4.0 255.255.255.0 1.1.1.1
no ip http server
!
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
!
line con 0
transport input none
line 2
autoselect during-login
autoselect ppp
login local
modem InOut
modem autoconfigure discovery
transport input all
stopbits 1
speed 115200
flowcontrol hardware
line aux 0
line aux 0
autoselect during-login
autoselect ppp
script dialer zhongda
login local
modem InOut
modem autoconfigure discovery
transport input all
stopbits 1
speed 115200
flowcontrol hardware
line vty 0 4
password router
login
!
no scheduler allocate
end
please help me!
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]