hello,
how do i interpret these parameters from a " show inter eth x "
beacon-gw#sh interfaces ethernet 1
Ethernet1 is up, line protocol is up
Description: LOCAL NETWORK at XYZ
Internet address is 192.168.2.1/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 3/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 60000 bits/sec, 30 packets/sec
5 minute output rate 150000 bits/sec, 29 packets/sec
18686339 packets input, 3880653480 bytes, 0 no buffer
Received 1382337 broadcasts, 0 runts, 0 giants, 0 throttles
4065 input errors, 0 CRC, 0 frame, 0 overrun, 4065 ignored, 0 abort
0 input packets with dribble condition detected
16787143 packets output, 836961434 bytes, 0 underruns
429 output errors, 487140 collisions, 9 interface resets
0 babbles, 0 late collision, 144826 deferred
366 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
beacon-gw#
NDABARASA MIKE
NATIONAL UNIVERSITY OF RWANDA
COMPUTING CENTRE
Email:[EMAIL PROTECTED]
Voice:
Office:(250)530666
Ext:1031
Mobile:(250)08510951
=================================================
PREDICTION IS HARD , ESPECIALLY THE FUTURE
&&&&&&&NIELS BOHR&&&&&&
IL EST DIFFICILE DE PREDIRE , SURTOUT L'AVENIR
own translation :)
=================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75&t=75
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
