I am just wondering what the most cost effective way would be to
implement ATM in my home lab from somebody else who has done it before,
and I am also wondering if anyone has any thoughts on the LightStream
100 ATM switch, it seems to be a lot cheaper than the 1010 and I was
wondering if the command set, etc. was the same. I am just starting to
set up my lab and would like to buy routers that are the cheapest for
doing ATM on.
Thanks,
Jason
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=287&t=287
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
