7000 with an AIP or 4500's (or above) with ATM interfaces, & most any
manufacturer ATM switch (FORE, Nortel, etc.). The cheapest Cisco ATM switch
I can think would be the LS100. It is possible to do ATM back to back also.
Still- it's big bucks
Phil
----- Original Message -----
From: Jason Harris
To:
Sent: Wednesday, April 11, 2001 7:28 PM
Subject: ATM in home lab [7:287]
> I am just wondering what the most cost effective way would be to
> implement ATM in my home lab from somebody else who has done it before,
> and I am also wondering if anyone has any thoughts on the LightStream
> 100 ATM switch, it seems to be a lot cheaper than the 1010 and I was
> wondering if the command set, etc. was the same. I am just starting to
> set up my lab and would like to buy routers that are the cheapest for
> doing ATM on.
>
> Thanks,
> Jason
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=297&t=287
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]