I was trying to do a password recovery on a 2503 router, after pressing
Break....here is what I got on the attachment.
Looks like its crashed, cann't type and its not going.
Please assist!!!
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
F3: 4442848+146464+241348 at 0x1000
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IR-L), Experimental Version 11.0(9682) [athippes
109]
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Fri 15-Nov-96 16:28 by athippes
Image text-base: 0x00001448, data-base: 0x00417FE4
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 03863193, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
1 ISDN Basic Rate interface.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Press RETURN to get started!
%LINK-3-UPDOWN: Interface BRI0, changed state to up
%LINK-3-UPDOWN: Interface Ethernet0, changed state to up
%LINK-3-UPDOWN: Interface Serial0, changed state to down
%LINK-3-UPDOWN: Interface Serial1, changed state to down
*Mar 1 00:00:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to up
*Mar 1 00:00:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
changed state to down
*Mar 1 00:00:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1,
changed state to down
*Mar 1 00:00:10:
Note: A random Spanning Tree Bridge Identifier address of 0000.0c00.0539
has been chosen for Bridge group 1 since there is no mac address
associated with the selected interface.
*Mar 1 00:00:10:
Ensure that this address is unique.
*Mar 1 00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to down
*Mar 1 00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0,
changed state to up
*Mar 1 00:00:13: %LINK-5-CHANGED: Interface Ethernet0, changed state to
administratively down
*Mar 1 00:00:13: %LINK-5-CHANGED: Interface Serial0, changed state to
administratively down
*Mar 1 00:00:13: %FR-5-DLCICHANGE: Interface Serial0 - DLCI 26 state
changed to DELETED
*Mar 1 00:00:14: %LINK-5-CHANGED: Interface BRI0, changed state to
administratively down
*Mar 1 00:00:14: %LINK-3-UPDOWN: Interface BRI0: B-Channel 1, changed state
to down
*Mar 1 00:00:14: %LINK-3-UPDOWN: Interface BRI0: B-Channel 2, changed state
to down
*Mar 1 00:00:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0,
changed state to down
*Mar 1 00:00:15: %LINK-5-CHANGED: Interface Serial1, changed state to
administratively down
*Mar 1 00:00:18: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-IR-L), Experimental Version 11.0(9682) [athippes
109]
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Fri 15-Nov-96 16:28 by athippes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=415&t=415
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
