I stand corrected - that's what I have...... a 3102 ----- Original Message ----- From: "Circusnuts" To: "Kevin Wigle" ; Sent: Monday, 23 April, 2001 20:39 Subject: Re: Can a 3104 serial interface provide clocking? [7:1656] > 3104's & 3204's operate both DCE & DTE. 3102's & 3202 only operate as DTE. > Most all V2 interfaces have DCE available. > > Phil > > ----- Original Message ----- > From: Kevin Wigle > To: > Sent: Monday, April 23, 2001 7:40 PM > Subject: Re: Can a 3104 serial interface provide clocking? [7:1656] > > > > nope you're right! :-) > > > > 3000's can't do the DCE thing. Got one here hooked up to a 4000. Same > prob > > but of course for me it's ok as the 4000 does dce. > > > > Guess you need a 3rd router in the middle! > > > > any excuse to buy another router is good for me. (unless one of the gurus > > here can concoct a special cable for you???) > > > > Kevin Wigle > > > > ----- Original Message ----- > > From: "Nathan Cruz" > > To: > > Sent: Monday, 23 April, 2001 19:19 > > Subject: Can a 3104 serial interface provide clocking? [7:1656] > > > > > > > I am trying to hook up two 3104's back to back but when I try to put in > > clock > > > 64000 I get the error msg. "Not allowed on DTE interface". When in fact > > the > > > sh > > > controller command shows that it is a dce cable attached. Any help would > > be > > > appreciated. Thanks. > > > > > > Nathan > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1665&t=1656 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
