I succeeded configuring the trunking using dot1q encapsulation. However, I
wonder if I can apply "EtherChannel" to the trunk for variable speed and
redundancy. If I have 2 FastEthernet ports configured to be the
EtherChannel, will the subinterfaces I created on one FastEthernet port will
replicate on the other one of the 2621? Because I know I cannot have the
same IP address on diferent interfaces of a router.
""EA Louie"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> this should work just perfect for you
>
> http://www.cisco.com/warp/public/473/50.shtml
>
> ----- Original Message -----
> From: Thomas
> To:
> Sent: Wednesday, April 25, 2001 10:28 PM
> Subject: Etherchannel between 2621 router and 3548 switch [7:2049]
>
>
> > Hi All - I wonder if it is possible to configure the 2 Fast Ethernet
ports
> > on the 2621 router to be the EtherChannel of trunk? If so, how can I
> create
> > sub-interfaces for Multi-vlans? any document I can find? Thanks All!
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2060&t=2049
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
