No problems... I've probably upgraded no less than 25 routers this way.
Just look for 72 pin, 60 nanosecond or better, & parity...
That's it !!!
Phil
----- Original Message -----
From: Vincent Chong
To:
Sent: Sunday, April 29, 2001 10:15 PM
Subject: Re: has anybody tried non-Cisco approved flash/memory [7:2498]
> Tried with all my cisco 2500 seies, found no problem.
>
> ""xc"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I need to upgrade some of my lab routers to handle 12.0 and 12.1. These
> > IOS's are resource hogs, so apparently I need to pump up the DRAM and
> flash.
> > So, has anybody tried out some of those non-Cisco approved DRAM and
flash
> > units? Don't worry, none of my routers are going to be used in a
> production
> > environment. But I won't do it if these units completely blow some
> circuit
> > on the router.
> >
> > XC
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2514&t=2498
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
