12.1(2)T supports "ip address dhcp". At least on the 4500-m.
-----Original Message-----
From: Rick Cossey [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 5:00 PM
To: [EMAIL PROTECTED]
Subject: Re: 2511 between cable modem and network [7:2312]
Raul,
Please explain what you mean by "1 Ethernet interface".All cable/DSL modems
I have workd with(It has been a lot) have a Ethernet handoff. You need 2
Ethernet interfaces to connect a cable modem to a router and then to your
LAN. Also, I have not been able to get an IOS version for the Cisco 4000
that does IP Address DHCP as needed to be a dhcp client. I am currently
doing it with a Cisco 2514.
Rick
""Raul F. Fernandez"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Or run nat overload off the 1 ethernet interface on the router, thats how
I
> do it.
>
> Raul
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Kevin Wigle
> Sent: Friday, April 27, 2001 4:16 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 2511 between cable modem and network [7:2312]
>
>
> quick answer - no
>
> The connection to the cable modem is ethernet. Don't get confused by the
> term "modem".
>
> You need a router with 2 ethernet ports.
>
> Kevin Wigle
>
> ----- Original Message -----
> From: Roberts, Timothy
> To:
> Sent: Friday, April 27, 2001 3:52 PM
> Subject: 2511 between cable modem and network [7:2312]
>
>
> > Can a 2511 be setup to connect a cable modem (ethernet) to a network
> segment
> > (ethernet)? I was going to use a 4000 but I do not have the flash
> > requirements to run 12.1 code so that I can make use of the "ip address
> > dhcp". Can I use one of the Async ports to connect to the cable modem
end
> > (provider via dhcp) and then enable nat to my network via the e0. Is
this
> > possible? Has anyone tried this before?
> > Thanks
> >
> > Confidentiality Notice: This e-mail message, including any attachments,
is
> > for the sole use of the intended recipient(s) and may contain
confidential
> > and privileged information. Any unauthorized review, use, disclosure or
> > distribution is prohibited. If you are not the intended recipient,
please
> > contact the sender by reply e-mail and destroy all copies of the
original
> > message.
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2755&t=2312
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]