NM-4T1-IMA is what is referenced on that URL you've posted

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t5/atm_ima.htm
 )

NM-4T1-IMA != NM-4T


NM-4T1-IMA: Four-port T1 ATM Network Module with IMA
The 4-port T1 ATM Network Module with IMA provides access to ATM WAN
up-links at fractional T3 bandwidths. Each link provides 4 ports with up to
6 Mbps connectivity. The T1 version provides an RJ-45 connector with
integrated CSU/DSU. Click Here for Datasheet.

Supported Platforms &
Minimum IOS Versions
3660 series - 12.0(5)T
3640 - 12.0(5)T
3620 - 12.0(5)T
2650 - 12.1(3)T
2600 series - 12.0(5)T

NM-4T: Four-port Serial Network Module
This network module has four synchronous serial interfaces, and supports a
total full-duplex throughput of 8 megabits per second (Mbps), which can be
realized over one port (at 8Mb/s) or across all four ports (at 2Mb/s on each
port). Each port supports full-duplex and half-duplex operation at T1 and E1
speeds. All ports use identical DB-60 connectors that support five interface
types (RS-232, RS-449, RS-530, V.35, X.21) in either DTE or DCE mode. Click
Here for Datasheet.

Supported Platforms &
Minimum IOS Versions
3660 series - 12.0(5)T
3640 - 11.2(4)XA
3620 - 11.2(4)XA
2650 - Not Available
2600 series - Not Available



--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/



""Jonathan Hays""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> The following URL seems to strongly indicate that the NM-4T is supported:
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t5/atm_ima.htm
>
>
>
>
> Joshua Beining wrote:
>
> > It seems that there is some confusion wrt network modules and 2600/3600
> > routers.  Searching on Ciscos site, they say that the NM-4T is not
> supported
> > for the 2600 series but I see cisco resellers, and others advertising
the
> > NM-4T for 2600/3600 routers.  Am I missing the doc from Cisco that says
the
> > NM-4T is now supported on the 2600 sereis?  Can anyone provide some
imput.
> > Thanks.
> >
> > -Joshua
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> --
> Jonathan Hays
> Acropolis Systems, Inc.
> (408) 935-3016
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3133&t=3056
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to