Absolutely. Go to www.groupstudy.com and search the archives. There's a
lot of pertinent information there regarding back-to-back configurations.
Generally, you'd connect the DCE side of the cable (it should be labeled) to
the FrameSwitch and the DTEs to the 'spokes'
> Hi All - I have two 2501 routers. One of them is set as a Frame Relay
> switch. I wonder if I can set a serial port of this router to be DTE
> interface and assign an IP address to it, so that I can ping this
interface
> from the other router (using back-to-back crossover serial cable).
Thanks.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4263&t=4256
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
