Hello ,
It is possible .
Sbp
""Thomas"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> If I am using a 2522 as a frame relay switch, can its A/S serial ports be
> configured as DCE interfaces and be connected to other router DTE
interfaces
> using a 60pin-60pin crossover cables? I am trying to setup a fram relay
> switch with more than 2 routers participate (excluding the frame relay
> switch router itself) so that I can create a hub router.... Any other
> suggestion for this configuration? Thanks.
>
>
>
>
>
>
>
> ""Fischer Reinhold"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi Thomas,
> >
> > i think it is not possible what you are trying to accomplish.
> > You need one Router with at least two serial interfaces dedicated
> > as the frame relay switch. So you need at least 3 Routers with
> > serial interfaces to practice frame relay.
> >
> > Others please correct me if there is a trick to do it with two routers.
> >
> > Greetings
> >
> > Reinhold
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4292&t=4256
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
