This happened to me a few times. In my case it was related to doing debugs.
Anytime I ran debugs - shortly after the PIX would stop processing packets.
Have you been running debugs. Could also be that you are sending too much
traffic through it - or have run out of memory. What is your traffic load
like and how much memory do you have - and how much is free. Check all this
when it is working as well as when it is not working and see if you see a
pattern.
Ian
----- Original Message -----
From: "Dennis Laganiere"
To:
Sent: Thursday, April 26, 2001 12:32 PM
Subject: PIX problem [7:2128]
> I've got a PIX 513 that went into production a few weeks ago. It was
> running fine for a while, and one day we lost internet connectivity inside
> my network.
>
> I tested for a few minutes and could get out from the DMZ, but not from
> inside. My partner reset the PIX and connectivity came back. This
repeated
> itself a few days later. Yesterday it happened twice.
>
> I obviously want to do something besides resetting it after each failure,
> but I'm not sure where to start. I looked through the CCO and didn't find
> any reference to a problem like mine.
>
> Any thoughts before I call the TAC?
>
> Let me know...
>
> --- Dennis
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2136&t=2128
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
