I tried 12.1.5t(7) also. I had to take my 7200 to 12.1.7T. You have to
be on the T train.
regards,
Steve
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 15, 2001 4:09 PM
To: [EMAIL PROTECTED]
Subject: ATM IMA network module [7:4594]
Good afternoon
I'm having a little difficulty installing my new 4 port ATM/IMA network
module in my 3640 router. The router will not recognize the module.
I've actually swapped three different modules - in different slots - to
no
avail - so I don't think it's a hardware issue.
I've tried the following different IOS images:
- 12.1.5T(7) IP/IPX/AT
- 12.2.1 IP/IPX/AT
I'm assuming I don't need an enterprise or 'plus' image (if so that's
not
documented anywhere I can find).
The router has 8MB flash and 96MB DRAM (and a 8MB PCMCIA flash card) -
its
only other module is a 2E2W with 2 WIC1DSUs installed.
Any ideas????? I'm already running several of these modules in 3660s
and
2621s - I know they work!
Don Dettmore
Lead Network Analyst
Fiserv CBS
(407) 513-5236
www.cbs.fiserv.com
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4601&t=4594
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
