We use the same cards in our 3640's. You need IP Plus. Make sure you have
at least
64mb memory in the router, otherwise it won't recognize the card.
[EMAIL PROTECTED] wrote:
> Good afternoon
>
> I'm having a little difficulty installing my new 4 port ATM/IMA network
> module in my 3640 router. The router will not recognize the module.
>
> I've actually swapped three different modules - in different slots - to no
> avail - so I don't think it's a hardware issue.
>
> I've tried the following different IOS images:
> - 12.1.5T(7) IP/IPX/AT
> - 12.2.1 IP/IPX/AT
>
> I'm assuming I don't need an enterprise or 'plus' image (if so that's not
> documented anywhere I can find).
>
> The router has 8MB flash and 96MB DRAM (and a 8MB PCMCIA flash card) - its
> only other module is a 2E2W with 2 WIC1DSUs installed.
>
> Any ideas????? I'm already running several of these modules in 3660s and
> 2621s - I know they work!
>
> Don Dettmore
> Lead Network Analyst
> Fiserv CBS
> (407) 513-5236
> www.cbs.fiserv.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4794&t=4594
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
