hello,
try
line 0 16 transport output all (telent)
if you are using WIN2k Hilgraeve you will have to hit twice
Good Luck
P
----- Original Message -----
From: "Mark Rose"
To:
Sent: Saturday, May 19, 2001 8:45 PM
Subject: Terminal Server [7:5149]
> I have a 2511 set up as a terminal server According to the Cisco
> documentation on Configuring a terminal server, the escape sequence is
> Ctrl-Shift-6-x. This doesn't work. I can make the connection to "west" but
I
> cannot use the esc sequence to jump back to the 2511 (I am using
> HyperTerminal with upgrade) or try to open a session with another router.
> The esc seq gives me a blank line & if I hit return the west prompt
appears
> again. I am not sure if I am missing a command on the west router. Can
> someone make a suggestion or steer me in the right direction? I would
> appreciate the help?
>
> TIA
> Mark
>
> Configs:
>
> 2511#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.0
> service password-encryption
> service udp-small-servers
> service tcp-small-servers
> !
> hostname 2511
> !
> enable secret 5 $1$KRXt$MfpQSqUGp0NOiHRhiRwPs1
> !
> no ip domain-lookup
> !
> interface Loopback0
> ip address 10.1.1.1 255.255.255.255
> !
> interface Ethernet0
> ip address 192.168.1.69 255.255.255.0
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> ip host east 2001 10.1.1.1
> ip host south 2004 10.1.1.1
> ip host north 2003 10.1.1.1
> ip host west 2002 10.1.1.1
> ip classless
> banner exec ^C
> 01 - west console
> 02 - east console
> 03 - north console
> 04 - south console ^C
> !
> line con 0
> line 1 16
> no exec
> transport input all
> line aux 0
> transport input all
> line vty 0
> exec-timeout 0 0
> password 7 06030328464F01
> login
> line vty 1
> exec-timeout 0 0
> password 7 050E0A062B4D46
> login
> line vty 2
> exec-timeout 0 0
> password 7 14121E02060522
> login
> line vty 3
> exec-timeout 0 0
> password 7 045E070F052044
> login
> line vty 4
> exec-timeout 0 0
> password 7 14121E02060522
> login
> !
> end
>
>
> Second router
>
> est#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname west
> !
> enable secret 5 $1$57px$PD.qgpO/R2whcXLTrvlYA.
> !
> !
> interface Ethernet0
> no ip address
> shutdown
> !
> interface Ethernet1
> no ip address
> shutdown
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> no ip classless
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> password 7 06030328464F01
> login
> transport input telnet
> !
> end
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5152&t=5149
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]