I wonder you are looking for the command "Clear line [number]"!
""Mark Rose"" The sequence of hitting ctrl-shift-6 then release all 3 keys
and quickly
hit
> 'x' works. I go back to the 2511 & can change sessions. This brought up
> another question. Once I get a session running on a second or third
router,
> how do you terminate a session while leaving the others (or just the
> original telnet to the access router running).
>
> As always the help is appreciated by all people who help with advice.
>
> Mark
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Brad McConnell
> Sent: Saturday, May 19, 2001 8:02 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Terminal Server [7:5149]
>
>
> Mark,
>
> When you get the blank line, then press enter and end up back at the west
> router, do you have a "Resuming connection to xxx..." line before west's
> router prompt? If not, I dont think the escape sequence is being
> acknowledged. When you input the command, do ctrl-shift-6, then release
all
> 3 keys and quickly hit 'x'. Kind of a moot point here, but in some cases
> (say an AIX box with a 3151 terminal), only the left ctrl key can be
used..
>
> Another thing to try would be hitting the spacebar when you get the blank
> line instead of enter. If the escape sequence IS working, then the enter
> key is taking you back again, and spacebar may cause the prompt to
display.
>
> -Brad McConnell.
>
>
> ""Mark Rose"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I have a 2511 set up as a terminal server According to the Cisco
> > documentation on Configuring a terminal server, the escape sequence is
> > Ctrl-Shift-6-x. This doesn't work. I can make the connection to "west"
but
> I
> > cannot use the esc sequence to jump back to the 2511 (I am using
> > HyperTerminal with upgrade) or try to open a session with another
router.
> > The esc seq gives me a blank line & if I hit return the west prompt
> appears
> > again. I am not sure if I am missing a command on the west router. Can
> > someone make a suggestion or steer me in the right direction? I would
> > appreciate the help?
> >
> > TIA
> > Mark
> >
> > Configs:
> >
> > 2511#sh run
> > Building configuration...
> >
> > Current configuration:
> > !
> > version 11.0
> > service password-encryption
> > service udp-small-servers
> > service tcp-small-servers
> > !
> > hostname 2511
> > !
> > enable secret 5 $1$KRXt$MfpQSqUGp0NOiHRhiRwPs1
> > !
> > no ip domain-lookup
> > !
> > interface Loopback0
> > ip address 10.1.1.1 255.255.255.255
> > !
> > interface Ethernet0
> > ip address 192.168.1.69 255.255.255.0
> > !
> > interface Serial0
> > no ip address
> > shutdown
> > no fair-queue
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > ip host east 2001 10.1.1.1
> > ip host south 2004 10.1.1.1
> > ip host north 2003 10.1.1.1
> > ip host west 2002 10.1.1.1
> > ip classless
> > banner exec ^C
> > 01 - west console
> > 02 - east console
> > 03 - north console
> > 04 - south console ^C
> > !
> > line con 0
> > line 1 16
> > no exec
> > transport input all
> > line aux 0
> > transport input all
> > line vty 0
> > exec-timeout 0 0
> > password 7 06030328464F01
> > login
> > line vty 1
> > exec-timeout 0 0
> > password 7 050E0A062B4D46
> > login
> > line vty 2
> > exec-timeout 0 0
> > password 7 14121E02060522
> > login
> > line vty 3
> > exec-timeout 0 0
> > password 7 045E070F052044
> > login
> > line vty 4
> > exec-timeout 0 0
> > password 7 14121E02060522
> > login
> > !
> > end
> >
> >
> > Second router
> >
> > est#sh run
> > Building configuration...
> >
> > Current configuration:
> > !
> > version 11.2
> > service password-encryption
> > no service udp-small-servers
> > no service tcp-small-servers
> > !
> > hostname west
> > !
> > enable secret 5 $1$57px$PD.qgpO/R2whcXLTrvlYA.
> > !
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > !
> > interface Ethernet1
> > no ip address
> > shutdown
> > !
> > interface Serial0
> > no ip address
> > shutdown
> > no fair-queue
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > no ip classless
> > !
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > password 7 06030328464F01
> > login
> > transport input telnet
> > !
> > end
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5163&t=5149
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]