Sounds like a VPN is your best bet.
Should you decide to implement the VPN, you may want to consider whether
you still need to maintain the modem pool on the Internet router. Reducing
this cost could help justify the cost of implementing a VPN solution. A
properly authenticated VPN user should be able to use any dial-up Internet
connection to reach your LAN.
Craig
At 10:15 AM 5/21/2001 -0400, you wrote:
>Hey all, is it possible to translate public IP addresses (outside) to
>private IP addresses (inside) on a PIX firewall. Basically the exact
>opposite of what's usually performed on a firewall. We are going to have
>users dial in to our internet router and receive a Public IP address. They
>have to get through our firewall to gain access to our LAN. Is there a way
>to translate the Public IP address they will obtain into a private IP
>address used by our LAN so they can access it? I thank you for your help...
>
>
> -Rizzo
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5260&t=5248
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
