It's always fun to have one of these discussions, especially when I could be
sleeping. This one seems to be turning into yet another of those "what is
truth?" questions. When dealing with Cisco, it is sometimes difficult to
tell.
The following link would appear to say something other than what you have
quoted. Granted, mine is a quick skim. But it does seem to state that one
SFM card provides 256G and the other is for redundancy.
http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/prodlit/c6sfm_ds.htm
notice that later in the link, Cisco starts talking bout packets per second
( PPS ) If you add the MSFC card you get 30mpps and if you add the DCF card
on top of that you get 100mpps. I bring this up because I had a
conversation off line with someone about needing the MSFC and DCF in order
to get the 256G backplane. Cisco's own configuration tool indicates no. The
person with whom I was discussing this indicated he has done a lot of
research and his finding was yes. My own reading tells me that if I were an
EE I might actually understand the link a bit better, and perhaps it would
make more sense. As is stands, I am perceiving it as a lot of double-talk.
This next link is where you, Frank, may have gotten your quote about the
failover.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/swfab.htm#xtocid223541
I just opened NetformX, the configuration tool my boss paid a LOT of money
for me to use in my design work. Once again I can't prove that I ever saw
the SFM card described as 128G, and now it appears that the one card is
indeed 256G. Serves me right for not checking this stuff every hour of
every day :->
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
frank
Sent: Tuesday, May 22, 2001 11:37 PM
To: [EMAIL PROTECTED]
Subject: Re: how to enlarge Switching Backplane of 6509 [7:5487]
but a cisco engineer told me i should just use one .
for why upgrade to 256G,the customer is god ,he wants to pay ,i don't
care.^_^
According to the following ,it seems if we use 2 sfm,just one is active
,another is not.
The following is from cisco website.
"128-Gbps Switch Fabric Module. The Switch Fabric Module requires Supervisor
Engine 2. Switch Fabric Modules must be installed in either slot 5 or 6 of
the Catalyst 6500 series switches. For redundancy, you can install a second
Switch Fabric Module. The Switch Fabric Module first installed functions as
the primary module. When two modules are installed at the same time, the
module in slot 5 functions as the primary module, and the module installed
in slot 6 functions as the backup. If you reset the Switch Fabric Module
installed in slot 5, the module in slot 6 becomes the active one."
v
"Chuck Larrieu" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Takes two to get 256
>
> Takes slots 5 & 6, making your 6509 a 6507 ;->
>
> Idle curiosity - why do you need a 256 gig back plane? Assuming all seven
of
> the other slots each contain the 16 port Gig E blades, and each port was
> going full duplex, that comes out to 224 gigs, according to my fingers. Oh
> yeah, through in the two Gig E ports on the sup module, and that gets to
> 226.
>
> I am still trying to figure how you can move that much data, given the way
> networks normally work. ;->
>
> Chuck
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
> frank
> Sent: Tuesday, May 22, 2001 8:53 PM
> To: [EMAIL PROTECTED]
> Subject: Re: how to enlarge Switching Backplane of 6509 [7:5487]
>
> do i need one or two 128G Switch Fabric Module?
>
> "dave mauro" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Don't expect to find this spelled out clearly anywhere on CCO, but to
the
> > best of my knowledge, you must have:
> >
> > 1. Supervisor Engine 2 (with PFC2)
> > 2. MSFC2
> > 3. 128G Switch Fabric Module
> > 4. 16-port GE module (WS-X6516-GBIC or WS-X6816-GBIC)
> > 5. Distributed Forwarding Card (DFC)
> >
> > Until recently this last piece has not been available...
> >
> > Search CCO for details on these fine products. Bring your wallet.
> >
> > Dave
> >
> >
> > On Tue, 22 May 2001, frank wrote:
> > >
> > > from 32G to 256G?
> > >
> > > Thanks
> > >
> > >
> > > Frank
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5534&t=5487
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]