Could you pls. remove my e-mail address from the list?..
Thanx.
--
babatope ojo
[EMAIL PROTECTED] - email
(202) 777-2641 ext. 8015 - voicemail/fax
---- "Arun" wrote:
> Hi
> Thanks for the information ......i will try this when i find time cause
> the
> router is on live network i cann't do tthat they will kill me ..........can
> u pls tell about
> I have 3600 router coonfigured as x25 ....i have 2 slots each having
> 4
> serial interfaces in it ...
> i have to configure this with 2 serial ports on slot one for x25
> encapsulation and on slot 2 i have to configure 2 serial ports which
> need to
> act as redundant in case there is problem with slot 1 ports ..........
> i have ver 11.3 runing on it ........
> i added the entries like .......
> x25 route 010104 int ser 1/2
> x25 route 010104 int ser 1/3
> x25 route 010103 int ser 2/2
> x25 route 010103 int ser 2/3
>
> First thing will this do the job the machines on the other end has
> 2 serial
> port for each machine one is active and one is standy .....machine
> switch
> over to standy if it sees error i link so i need to route the packets
> to
> this standby machine with interface ser 2/2 and ser 2/3 .
>
> Now i read somewhere like x25 retry command and backup interface command
> ...
> how can i use them can anybody send me the configuration and also will
> this
> work on ver 11.3
> i tried it on ver11.3 but i think it doesn';t support it ........
>
> Pls suggest something .............
>
> Regards
> Arun Sharma
>
>
>
>
>
> ""Bishara, Anan"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > If u delete any subinterface u need to reboot the router to remove
> it. It
> > will stay in that case until u reboot the router.
> > Regards,
> > Anan
> >
> > -----Original Message-----
> > From: Arun [mailto:[EMAIL PROTECTED]]
> > Sent: Mon, May 28, 2001 10:41 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: Serial1/3.1 is deleted, line protocol is down [7:6090]
> >
> >
> > Hi
> > let me explain what i mean to ask
> > i try to configured a serial interface(sub interface) on ser1/3 i
> could
> n't
> > achieve what i was trying to do (i was trying to configure a backup
> > interface) so i removed the sub interface using
> > command
> > no int ser1/3.1
> > but now even after removing the interface i see the following thing
> when i
> > use show int ..
> > i think it should not be there ...right or i am wrong
> > so why it still show this
> > Serial1/3.1 is deleted, line protocol is down
> > Hardware is M4T
> > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > reliability 255/255, txload 1/255, rxload 1/255
> > Encapsulation X25
> > Serial2/0 is down, line protocol is down
> > Hardware is M4T
> > Description: BGW 1.1
> > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > reliability 255/255, txload 1/255, rxload 1/255
> > Encapsulation X25, loopback not set
> > X.25 DCE, address , state R/Inactive, modulo 8, timer 0
> >
> >
> > Regards
> > Arun Sharma
> >
> >
> > ""ElephantChild"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > On Mon, 28 May 2001, Arun wrote:
> > >
> > > > Hi
> > > > i am getting this message when i run
> > > > show int command on 3600 series router with x25 on it
> > > > i tried configuring it but i removed whats wrong can u pls help....
> > >
> > > If you didn't do so already, read what the cisco docs say on "show
> > > interface", then tell us what specific part you still don't understand,
> > > and what you think it could mean. Also tell us what other steps
> you took
> > > to answer your question, and how and why you think they failed.
> > >
> > > Or, if your question isn't "what does a deleted/down status mean?",
> > > you'll have to tell us what it is.
> > >
> > > > Regards
> > > > Arun Sharma
> > > >
> > > > Serial1/3.1 is deleted, line protocol is down
> > > > Hardware is M4T
> > > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > > reliability 255/255, txload 1/255, rxload 1/255
> > > > Encapsulation X25
> > > > Serial2/0 is down, line protocol is down
> > > > Hardware is M4T
> > > > Description: BGW 1.1
> > > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > > reliability 255/255, txload 1/255, rxload 1/255
> > > > Encapsulation X25, loopback not set
> > > > X.25 DCE, address , state R/Inactive, modulo 8, timer 0
> > > > Defaults: idle VC timeout 0
> > > > cisco encapsulation
> > > > input/output window sizes 2/2, packet sizes 128/128
> > > > Timers: T10 60
> > >
> > > --
> > > "Someone approached me and asked me to teach a javascript course.
> I was
> > > about to decline, saying that my complete ignorance of the subject
> made
> > > me unsuitable, then I thought again, that maybe it doesn't, as
> driving
> > > people away from it is a desirable outcome." --Me
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________________________________________
To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
all in one place - sign up today at http://www.zdnetonebox.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6102&t=6102
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
