On Mon, 28 May 2001, Arun wrote:
> Hi
> i am getting this message when i run
> show int command on 3600 series router with x25 on it
> i tried configuring it but i removed whats wrong can u pls help....
If you didn't do so already, read what the cisco docs say on "show
interface", then tell us what specific part you still don't understand,
and what you think it could mean. Also tell us what other steps you took
to answer your question, and how and why you think they failed.
Or, if your question isn't "what does a deleted/down status mean?",
you'll have to tell us what it is.
> Regards
> Arun Sharma
>
> Serial1/3.1 is deleted, line protocol is down
> Hardware is M4T
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation X25
> Serial2/0 is down, line protocol is down
> Hardware is M4T
> Description: BGW 1.1
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation X25, loopback not set
> X.25 DCE, address , state R/Inactive, modulo 8, timer 0
> Defaults: idle VC timeout 0
> cisco encapsulation
> input/output window sizes 2/2, packet sizes 128/128
> Timers: T10 60
--
"Someone approached me and asked me to teach a javascript course. I was
about to decline, saying that my complete ignorance of the subject made
me unsuitable, then I thought again, that maybe it doesn't, as driving
people away from it is a desirable outcome." --Me
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6095&t=6090
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
