Here's a hint on how to remove yourself. If you can bother sending an email
every few days begging to be removed, you can take the time out and go to
www.groupstudy.com and there's a box in the lower right hand corner of the
screen. Type in your email address and click on the Unsubscribe radio
button and then click on the Submit button. That's it. You're done. No
more email messages. If you can't figure out how to do it please ask
someone to help you.
Thanks for listening.
----- Original Message -----
From: "babatope ojo"
To:
Sent: Monday, May 28, 2001 5:44 AM
Subject: Remove me.... [7:6102]
> Could you pls. remove my e-mail address from the list?..
>
> Thanx.
>
> --
> babatope ojo
> [EMAIL PROTECTED] - email
> (202) 777-2641 ext. 8015 - voicemail/fax
>
>
>
> ---- "Arun" wrote:
> > Hi
> > Thanks for the information ......i will try this when i find time cause
> > the
> > router is on live network i cann't do tthat they will kill me
..........can
> > u pls tell about
> > I have 3600 router coonfigured as x25 ....i have 2 slots each having
> > 4
> > serial interfaces in it ...
> > i have to configure this with 2 serial ports on slot one for x25
> > encapsulation and on slot 2 i have to configure 2 serial ports which
> > need to
> > act as redundant in case there is problem with slot 1 ports ..........
> > i have ver 11.3 runing on it ........
> > i added the entries like .......
> > x25 route 010104 int ser 1/2
> > x25 route 010104 int ser 1/3
> > x25 route 010103 int ser 2/2
> > x25 route 010103 int ser 2/3
> >
> > First thing will this do the job the machines on the other end has
> > 2 serial
> > port for each machine one is active and one is standy .....machine
> > switch
> > over to standy if it sees error i link so i need to route the packets
> > to
> > this standby machine with interface ser 2/2 and ser 2/3 .
> >
> > Now i read somewhere like x25 retry command and backup interface command
> > ...
> > how can i use them can anybody send me the configuration and also will
> > this
> > work on ver 11.3
> > i tried it on ver11.3 but i think it doesn';t support it ........
> >
> > Pls suggest something .............
> >
> > Regards
> > Arun Sharma
> >
> >
> >
> >
> >
> > ""Bishara, Anan"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > If u delete any subinterface u need to reboot the router to remove
> > it. It
> > > will stay in that case until u reboot the router.
> > > Regards,
> > > Anan
> > >
> > > -----Original Message-----
> > > From: Arun [mailto:[EMAIL PROTECTED]]
> > > Sent: Mon, May 28, 2001 10:41 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: Serial1/3.1 is deleted, line protocol is down [7:6090]
> > >
> > >
> > > Hi
> > > let me explain what i mean to ask
> > > i try to configured a serial interface(sub interface) on ser1/3 i
> > could
> > n't
> > > achieve what i was trying to do (i was trying to configure a backup
> > > interface) so i removed the sub interface using
> > > command
> > > no int ser1/3.1
> > > but now even after removing the interface i see the following thing
> > when i
> > > use show int ..
> > > i think it should not be there ...right or i am wrong
> > > so why it still show this
> > > Serial1/3.1 is deleted, line protocol is down
> > > Hardware is M4T
> > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > reliability 255/255, txload 1/255, rxload 1/255
> > > Encapsulation X25
> > > Serial2/0 is down, line protocol is down
> > > Hardware is M4T
> > > Description: BGW 1.1
> > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > reliability 255/255, txload 1/255, rxload 1/255
> > > Encapsulation X25, loopback not set
> > > X.25 DCE, address , state R/Inactive, modulo 8, timer 0
> > >
> > >
> > > Regards
> > > Arun Sharma
> > >
> > >
> > > ""ElephantChild"" wrote in message
> > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > On Mon, 28 May 2001, Arun wrote:
> > > >
> > > > > Hi
> > > > > i am getting this message when i run
> > > > > show int command on 3600 series router with x25 on it
> > > > > i tried configuring it but i removed whats wrong can u pls
help....
> > > >
> > > > If you didn't do so already, read what the cisco docs say on "show
> > > > interface", then tell us what specific part you still don't
understand,
> > > > and what you think it could mean. Also tell us what other steps
> > you took
> > > > to answer your question, and how and why you think they failed.
> > > >
> > > > Or, if your question isn't "what does a deleted/down status mean?",
> > > > you'll have to tell us what it is.
> > > >
> > > > > Regards
> > > > > Arun Sharma
> > > > >
> > > > > Serial1/3.1 is deleted, line protocol is down
> > > > > Hardware is M4T
> > > > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > > > reliability 255/255, txload 1/255, rxload 1/255
> > > > > Encapsulation X25
> > > > > Serial2/0 is down, line protocol is down
> > > > > Hardware is M4T
> > > > > Description: BGW 1.1
> > > > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > > > reliability 255/255, txload 1/255, rxload 1/255
> > > > > Encapsulation X25, loopback not set
> > > > > X.25 DCE, address , state R/Inactive, modulo 8, timer 0
> > > > > Defaults: idle VC timeout 0
> > > > > cisco encapsulation
> > > > > input/output window sizes 2/2, packet sizes 128/128
> > > > > Timers: T10 60
> > > >
> > > > --
> > > > "Someone approached me and asked me to teach a javascript course.
> > I was
> > > > about to decline, saying that my complete ignorance of the subject
> > made
> > > > me unsuitable, then I thought again, that maybe it doesn't, as
> > driving
> > > > people away from it is a desirable outcome." --Me
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> ___________________________________________________________________
> To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
> all in one place - sign up today at http://www.zdnetonebox.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6140&t=6102
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
