Time to change your terminal emulation software to different speeds until
you find the correct one.
I have heard that with Hyperterminal that you need to completely close down
the application for each speed change. Others may comment from experience.
BTW Do you have a SmartNet service contract on that box?
> -----Original Message-----
> From: John Neiberger [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, May 31, 2001 12:41 PM
> To: [EMAIL PROTECTED]
> Subject: VERY strange 2621 behavior [7:6636]
>
>
> This is exceptionally strange....
>
> We just received a used 2621 running 12.0(7)T. Initially it booted
> just fine and we got a prompt. While in priveleged mode we did a show
> run and intertwined with the output was a portion of a message. The
> readable portion said something about "environment write to NVRAM
> failed". We saw this three or four times.
>
> So, after poking around a bit we did a reload. During the reload we
> saw the error again. Toward the end of the reload we
> received a warning
> message that said something like this: "This action will disable
> password recovery. Be sure that you have alternatives to password
> recovery before continuing. Continue with operation [yes/no]? "
>
> I have absolutely no idea what that means, I have never seen anything
> like it before. We answered no, of course. At this point the router
> locked up and it appears that the console baud rate has changed but so
> far we're unable to figure out what it changed to. I've rebooted the
> router several times to no avail. Nothing but gibberish on
> my terminal
> screen.
>
> Any thoughts? I've searched CCO and have yet to see anything about
> this behavior yet.
>
> Thanks,
> John
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6644&t=6636
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]