Rule 1:Don't use hyperterminal
See cws.internet.com or any other shareware/freeware site for apps that
can do a break properly and do not suck.
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Thu, 31 May 2001, Daniel Cotts wrote:
> Time to change your terminal emulation software to different speeds until
> you find the correct one.
> I have heard that with Hyperterminal that you need to completely close down
> the application for each speed change. Others may comment from experience.
> BTW Do you have a SmartNet service contract on that box?
>
> > -----Original Message-----
> > From: John Neiberger [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, May 31, 2001 12:41 PM
> > To: [EMAIL PROTECTED]
> > Subject: VERY strange 2621 behavior [7:6636]
> >
> >
> > This is exceptionally strange....
> >
> > We just received a used 2621 running 12.0(7)T. Initially it booted
> > just fine and we got a prompt. While in priveleged mode we did a show
> > run and intertwined with the output was a portion of a message. The
> > readable portion said something about "environment write to NVRAM
> > failed". We saw this three or four times.
> >
> > So, after poking around a bit we did a reload. During the reload we
> > saw the error again. Toward the end of the reload we
> > received a warning
> > message that said something like this: "This action will disable
> > password recovery. Be sure that you have alternatives to password
> > recovery before continuing. Continue with operation [yes/no]? "
> >
> > I have absolutely no idea what that means, I have never seen anything
> > like it before. We answered no, of course. At this point the router
> > locked up and it appears that the console baud rate has changed but so
> > far we're unable to figure out what it changed to. I've rebooted the
> > router several times to no avail. Nothing but gibberish on
> > my terminal
> > screen.
> >
> > Any thoughts? I've searched CCO and have yet to see anything about
> > this behavior yet.
> >
> > Thanks,
> > John
> > Report misconduct
> > and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6935&t=6636
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]