I have this set up below: My problem is that I can not ping E0 on R2501
from anywhere. I also cannot enter a static route to it. How would I get
the 2501 to act as a gateway between the two networks? I've done some
searches and looked over some books but I'm still not getting out through
E0. This is just a simple home lab but it is begining to irk me, any help
would be grealy appreciated.
Internet/Cable modem
|
|
|
E0: 206.107.237.12 255.255.255.0
R2501
S0:172.16.20.1 255.255.255.0
|
|
|
|
S0: 172.16.20.2 255.255.255.0
R2521
S1: 172.16.40.1 255.255.255.0
|
|
|
S0: 172.16.40.2 255.255.255.0
R2502
Building configuration...
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Router
!
enable secret 5 $1$aifs$0SCPCn.iDMa/ISoNcv.gH.
!
ip dhcp-server 10.1.1.1
!
interface Ethernet0
ip address 206.107.237.12 255.255.255.0
!
interface Serial0
ip address 172.16.20.1 255.255.255.0
no fair-queue
!
interface Serial1
no ip address
shutdown
!
no ip classless
ip route 172.16.40.0 255.255.255.0 172.16.20.2
!
!
line con 0
line aux 0
line vty 0 4
password ########
login
line vty 5 197
password ########
login
!
end
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7102&t=7102
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
