Where did you get the 206.107.237.0 address?
----- Original Message -----
From: "Bob Edmonds"
To:
Sent: Monday, June 04, 2001 9:50 AM
Subject: Help with irksome situation = ( [7:7102]
> I have this set up below: My problem is that I can not ping E0 on R2501
> from anywhere. I also cannot enter a static route to it. How would I get
> the 2501 to act as a gateway between the two networks? I've done some
> searches and looked over some books but I'm still not getting out through
> E0. This is just a simple home lab but it is begining to irk me, any help
> would be grealy appreciated.
>
> Internet/Cable modem
> |
> |
> |
> E0: 206.107.237.12 255.255.255.0
> R2501
> S0:172.16.20.1 255.255.255.0
> |
> |
> |
> |
> S0: 172.16.20.2 255.255.255.0
> R2521
> S1: 172.16.40.1 255.255.255.0
> |
> |
> |
> S0: 172.16.40.2 255.255.255.0
> R2502
>
>
>
>
>
>
>
>
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname Router
> !
> enable secret 5 $1$aifs$0SCPCn.iDMa/ISoNcv.gH.
> !
> ip dhcp-server 10.1.1.1
> !
> interface Ethernet0
> ip address 206.107.237.12 255.255.255.0
> !
> interface Serial0
> ip address 172.16.20.1 255.255.255.0
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> no ip classless
> ip route 172.16.40.0 255.255.255.0 172.16.20.2
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> password ########
> login
> line vty 5 197
> password ########
> login
> !
> end
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7141&t=7102
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]