I'll assume that you are referring to a 2500 series router. Keep in mind
that a 2500 runs from Flash. You can't alter the Flash while it is in use.
Change the configuration register to 0x2101 and reload. It will then boot
from ROM as router(boot)>. The Flash will then be R/W.
Check on CCO for instructions on updating IOS for a more full explanation.
> -----Original Message-----
> From: friend [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 14, 2001 9:36 PM
> To: [EMAIL PROTECTED]
> Subject: Changing the Flash mode [7:8657]
>
>
> Hello,
> Does any one know how to change the Flash from Read-only mode
> to R/W mode ?
> Thanks
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8659&t=8657
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]