putting the router in 0x41 mode will also allow you to have r/w to flash.
eric, how did the test go? congrats?
-Frank
On Fri, 15 Jun 2001, EA Louie wrote:
> The only reason (that I can think of) that you'd need to do that is to
write
> a new image onto flash. And when you do a 'copy tftp flash, the router
> automatically puts the flash into R/W mode. (At least in Ver 12.0 and
> higher - might even work in 11.2 or' 11.3)
>
> If you wanted to do it for some other reason, I'd love to hear about it.
>
> -e-
>
> ----- Original Message -----
> From: "friend"
> To:
> Sent: Thursday, June 14, 2001 7:36 PM
> Subject: Changing the Flash mode [7:8657]
>
>
> > Hello,
> > Does any one know how to change the Flash from Read-only mode to R/W mode
> ?
> > Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8686&t=8657
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]