I recently accquired two 3548XL's I want to connect both via giga
ethernet. The problem I'm facing is that the link light will go up on one,
but not on the other. I had the TX/RX ports reversed ie RX going to the TX
on the other switch and vice versa. I configured both 0/1 modules with no
negoiation auto, and duplex full. When I bring an interface up say on
3548XL-A and 3548XL-B, the A comes up, the B comes up but goes down right
away. The link light stays up on the 3548XLA. When I switch the cables
around (multi mode fiber) the opposite happens. IE. B interace comes up,
and A goes down. I can't provide configs right now, but I will in a few
hours (I'm not at home right now). I've tried different fiber cables and
no go. I know for a fact they work. If anyone who has this type of config
or knows how I should tackle it could drop me a line, I would appreciate
it.
--
"Sanity is calming, but madness is far more interesting."
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9098&t=9098
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]