Sounds like a bad fiber cable.
______________________________
Thomas Crowe
Technical Director
Research & Development
CTS - Atlanta
Phone: 770-664-3900 ext 45
______________________________
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Marco P Rodrigues
Sent: Tuesday, June 19, 2001 3:33 PM
To: [EMAIL PROTECTED]
Subject: Connecting Two 3548XL's with GigaEthernet [7:9098]
I recently accquired two 3548XL's I want to connect both via giga
ethernet. The problem I'm facing is that the link light will go up on one,
but not on the other. I had the TX/RX ports reversed ie RX going to the TX
on the other switch and vice versa. I configured both 0/1 modules with no
negoiation auto, and duplex full. When I bring an interface up say on
3548XL-A and 3548XL-B, the A comes up, the B comes up but goes down right
away. The link light stays up on the 3548XLA. When I switch the cables
around (multi mode fiber) the opposite happens. IE. B interace comes up,
and A goes down. I can't provide configs right now, but I will in a few
hours (I'm not at home right now). I've tried different fiber cables and
no go. I know for a fact they work. If anyone who has this type of config
or knows how I should tackle it could drop me a line, I would appreciate
it.
--
"Sanity is calming, but madness is far more interesting."
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of Thomas Crowe.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9127&t=9098
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
