i dont know about the serial int BUT.....
the igs ios you have on your machine won`t do diddly....no ospf.no rip .no
ip no nothing .....get a new ios ( a proper 2503 ip ios ) and try again
i think you can only use a ios 11.2 because you need more flash to run some
of the later ones....
HTH
steve
>From: "Hunt Lee"
>Reply-To: "Hunt Lee"
>To: [EMAIL PROTECTED]
>Subject: Help!!! [7:9311]
>Date: Thu, 21 Jun 2001 09:56:09 -0400
>
>[ The following text is in the "x-user-defined" character set. ]
> [ Your display is set for the "US-ASCII" character set. ]
> [ Some characters may be displayed incorrectly. ]
>
>I have just bought a Cisco 2503 router from Ebay. However, after I boot
>up the router, I only see the following 2 interfaces:
>
>Router>show ip int brief
>Interface IP-Address OK? Method Status
>Protocol
>BRI0 unassigned YES not set administratively down
>down
>Ethernet0 unassigned YES not set administratively down
>down
>Router>
>
>But I can't find the Serial interfaces. I tried swapping out the DRAM
>and Flash, but the same thing happen. Please help. Another thing I
>noticed when the router boots up:
>
>F3: 3343908+79112+202788 at 0x3000060 show flash
>
>System flash directory:
>File Length Name/status
> 1 3423052 igs-g-l.110-9
>[3423116 bytes used, 771188 available, 4194304 total]
>4096K bytes of processor board System flash (Read ONLY)
>
>And when i do show ver, it's not even showing up??
>
>Processor board ID 02996147, with hardware revision 00000000
>Bridging software.
>Basic Rate ISDN software, Version 1.0.
>1 Ethernet/IEEE 802.3 interface.
>1 ISDN Basic Rate interface.
>32K bytes of non-volatile configuration memory.
>4096K bytes of processor board System flash (Read ONLY)
>
>Configuration register is 0x2102
>
>
>Regards,
>Hunt Lee
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9320&t=9311
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
