At 05:56 AM 7/10/01 -0400, Stephen Skinner wrote:
>guys ,
>
>this is what i saw when i ran this test on my 5509
>
>this is my 5509
>
>
>System Bootstrap Version: 2.4(1)
>
>Hardware Version: 1.3 Model: WS-C5500 Serial #:
>Module Ports Model Serial # Hw Fw Fw1 Sw
>------ ----- ---------- --------- ------ ------- -------
>--------------------
>1 2 WS-X5506 007586383 2.1 2.4(1) 2.4(1) 3.1(1)
>3 1 WS-X5302 010457260 7.0 20.7 3.1(1) 11.2(12a.P1)P1
>4 24 WS-X5224 007583504 1.3 3.1(1) 3.1(1)
>5 2 WS-X5101 005844319 1.2 1.1 1.3 2.1(7)
>7 12 WS-X5201 006492462 2.0 3.1(1) 3.1(1)
>9 12 WS-X5201 006492554 2.0 3.1(1) 3.1(1)
>10 24 WS-X5224 007585630 1.3 3.1(1) 3.1(1)
>
>changing the VTP domain does NOT change the revision number
>
>adding a vlan does ...... change the rev........
>
>i then RESET my system and low and behold.......
>
>my rev number is 1
>
Was this a warm boot or cold boot ?
If it was a warm boot, the documentation seems to support that in
some cases, i.e switch/OS versions, warm boot or clear config all
will not reset the vtp config rev number.
If it was a cold boot (power down/power up) and the config rev number
didn't reset, I'll at a lost, but that wouldn't the first time I've been
dumbfounded by the way something actually works vice the way I believe
or have learned(read) it works. That's what so great about learning
the interworkings of internetworking!
>
>anyone want to give me the command to set vtp rev to 0 ...apart from
>deleting all the vlan`s .....and i`ll do it and post the responce
>
>steve
I'm not aware of a specific command that will reset the vtp config rev
number, but if there is one, I'm sure someone here will correct me and
educate us all!
Stefan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11722&t=11335
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
