No because you do not need a routing protocol to run cdp. cdp runs at the
data-link layer and learns about other cisco devices running cdp as
neighbors on the same wan or lan segment with multicasting.
>>> "Donald B Johnson jr" 07/10/01 10:28AM >>>
Can you use rip to route cdp. Why?
----- Original Message -----
From: "Lowell Sharrah"
To: ;
Sent: Tuesday, July 10, 2001 7:09 AM
Subject: Re: [7:11709]
this is a common misconception. A routing protocol is a protocol like
eigrp, igrp, is-is,ospf, etc. A routed protocol is like ipx/spx, tcp/ip,
vines, decnet, etc. A routed protocol must have a layer 3 address so
netbios or cdp cannot be routed by themselves.
>>> "Donald B Johnson jr" 07/10/01 09:59AM >>>
Couple issues there wilson.
First the csu-dsu issue, someone is spoofing my e-mail address check the
header it says SR not JR.
Second my response was to mohamed not parky, I thought his definition was a
little off. Also I thought the response should have made the person
(Mohamed) think, not just recite the cisco routED routING line.
Let me reinterate the question
>>Ask yourself can a router route without a protocol.
Maybe you can trace a packet from the time it leaves the source and arrives
at the destination for us Wilson.
I did think it was a good question to ask someone who answered Parky's
question with that response.
Although I didn't answer the csu/dsu question I don't mind someone using my
e-mail address cause if they told them to get a book that is a good answer.
Lets get a roll call of all you CCIE's that didn't do their own research.
----- Original Message -----
From: "Wilson, Bradley"
To:
Sent: Tuesday, July 10, 2001 6:10 AM
> Donald,
>
> I know you think your responses are helpful, but I have to let you
> know that I don't think they are. Think about what you're saying to this
> person, and try to see it from their perspective: they obviously don't
speak
> English. What they're asking isn't so much a technical question as it is
a
> definitional question.
>
> You also wrote a reply (to I believe the same poster) when he asked
> what a CSU/DSU was. Your response was to "get a book and read through it
> this time." Could you perhaps have included some suggestions as to which
> books he might read? Keep in mind that CSU/DSU functionality is not
covered
> in any CCNA-level text that I've ever read, and is not part of the Cisco
> curriculum. The question was valid, and your response belittled the
poster.
>
> Please make sure your responses in the future are respectful and
> helpful.
>
>
> Sincerely,
>
> Bradley J. Wilson
>
>
>
>
>
> Donald B Johnson jr wrote:
> > Ask yourself a question can a router route without a protocol.
>
>
>
>
> ----- Original Message -----
> From: "Mohamed El Komy"
> To:
> Sent: Tuesday, July 10, 2001 12:45 AM
> Subject: Re: routing and routed [7:11655]
>
>
> > "parky chan" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Dear
> > > What is the different of routing protocols and routed protocols
> > > and give me example?
> > >
>
> Bradley J. Wilson
> CCNP CCDP MCSE NNCSS CNX MCT CTT
> EDS/Boston Scientific Account
> (508) 650-8739
> [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11735&t=11709
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
