Have you ever used a list to block 520 udp applied say, inbound, on an
interface and see if RIP will populate that table.
----- Original Message -----
From: "Chuck Larrieu"
To: "Donald B Johnson jr"
Sent: Wednesday, July 11, 2001 1:15 PM
Subject: RE: [7:11709]
> that one is riddled with technicalities. all routing protocols use network
> layer packets to carry their information. personally, I believe they are
> distinct in that routing protocols carry routing information only.
>
> Chuck
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Donald B Johnson jr
> Sent: Wednesday, July 11, 2001 7:53 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [7:11709]
>
>
> Gold star for chuck
> default or static routes work fine and they aint no protocol. So routING
> protocols don't route routED protocols it's the route process and probably
> some flavor of address resolution that moves packets from one network to
> another. I would be intimately familiar with what happens to the MAC and
the
> route process for the CCIE written.
> Routing protocols build and maintain route tables dynamically that is all.
> Next question can a routing protocol be contained inside a routed
protocol?
> The routED, routING definition attempts to make them mutually exclusive..
>
>
>
> ----- Original Message -----
> From: "Chuck Larrieu"
> To: "Donald B Johnson jr" ;
> Sent: Tuesday, July 10, 2001 4:39 PM
> Subject: RE: [7:11709]
>
>
> > Missed the beginning of this thread, but from what I have seen it walks
> the
> > edge of something central to what we all do or hope to do for a living.
> >
> > To whit, what does a router do, and how does it do it?
> >
> > I don't recall seeing this discussed anyplace except in one of the white
> > papers on certification zone ( plug plug www.certificationzone.com )
> >
> > packet received by router
> > router checks forwarding table ( routing table )
> > if it finds a match it forwards the packet out the appropriate
interface.
> >
> > note that in no part of this process does anything like OPSF of RIP or
> EIGRP
> > play a part.
> >
> > how do routes get into a routing table? only two ways I can think of (
> three
> > if one considers Cisco On Demand Routing (ODR)
> >
> > understanding this process is a left handed way of understanding the
> > difference between routed and routing protocols.
> >
> > Chuck
> >
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Donald B Johnson jr
> > Sent: Tuesday, July 10, 2001 11:57 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [7:11709]
> >
> >
> > Actually it is a yes or no question.
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Jim Dixon"
> > To: "Donald B Johnson jr"
> > Sent: Tuesday, July 10, 2001 10:07 AM
> > Subject: RE: [7:11709]
> >
> >
> > > cdp is a broadast and a proprietary protocol used by Cisco devices to
> > > discover other Cisco devices.
> > > Thus Cisco Discovery Protocol. (CDP)
> > > How would you use RIP to route a broadcast packet? Why would you want
> > > broadcasts to propagate across your router(S)?
> > >
> > > Curious though,
> > > to what are you referring when you asked can a router route without a
> > > protocol? surely this is a rhetorical quesiton.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12021&t=11709
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
