Yes, but I have a few customers where the bought two T1's Multiplexed, and
got their 2 Mbps. I am currently converting them over to 2 2600's on each
end. This will allow me to use HSRP and load balance the lines.
-----Original Message-----
From: Schneider, Matt [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 9:43 AM
To: 'Ayers, Michael'
Subject: RE: line speed [7:11911]
2.028mb is for an e1 or European T1 which has 32 timeslots 32x64=2.048
-----Original Message-----
From: Ayers, Michael [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 12:44 PM
To: [EMAIL PROTECTED]
Subject: RE: line speed [7:11911]
The only way is to MUX 2 T1s together (if you are referring to trying to get
router port speed from T1 technology). 2 T1's = 3MB. A 2Mb router port on
each end will be the limiting factor, and the 2 t1's will only see 2Mb of
traffic.
Thank You,
Michael Ayers
Network Engineer
> OneNeck IT Services
(480) 539-2203
(800) 272-3077
-----Original Message-----
From: Burnham, Chris [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 4:51 AM
To: [EMAIL PROTECTED]
Subject: line speed [7:11911]
It seem my earleir question either confused everyone or basically didn't
interest anyone.
To put it in a nutshell.This is what I need to find out.
Cisco state that a Synchronous Serial interface, eg. a WIC-1T will run up to
2.048 mbps
HOW can you get this line speed to a Synch serial interface ?? eg. n x 64,
e1 etc ????????????
I need to know ASAP
Chris Burnham,
Systems Engineer,
Delphis Consulting Plc.
Tel: +(44) 020 7916 0200
Mob: +(44) 07799403576
[EMAIL PROTECTED]
This e-mail and any files transmitted with it are intended solely for the
addressee and are confidential. They may also be legally privileged.
Copyright in them is reserved by Delphis Consulting PLC ["Delphis"] and they
must not be disclosed to, or used by, anyone other than the addressee. If
you have received this e-mail and any accompanying files in error, you may
not copy, publish or use them in any way and you should delete them from
your system and notify us immediately.E-mails are not secure. Delphis does
not accept responsibility for changes to e-mails that occur after they have
been sent. Any opinions expressed in this e-mail may be personal to the
author and may not necessarily reflect the opinions of Delphis.
Privileged/Confidential Information may be contained in this message or
attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
conclusions and other information in this message that do not relate to the
official business of this company shall be understood as neither given nor
endorsed by it.
Privileged/Confidential Information may be contained in this message or
attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
conclusions and other information in this message that do not relate to the
official business of this company shall be understood as neither given nor
endorsed by it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11970&t=11911
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
