Hi Mike,
thanks for your answer. Does that mean that if a shut/no shut doesn't result
in an up/down, there definitely IS a problem with either the cabling OR the
switch port ? For now that is all I need to know...
Thanks for your help in advance.
Regards,
Hans
>From: "Michael"
>Reply-To: "Michael"
>To: [EMAIL PROTECTED]
>Subject: RE: Switch port failure on 3548 [7:15089]
>Date: Tue, 7 Aug 2001 09:27:36 -0400
>
>Herr Stout,
>
>Another easy way of determining if the problem is with the port or the
>cable would be to plug both ends of the cat 5 cable(s) into a cable
>tester. The manner Mike proposes is legit but I would want to
>positively know that all pairs are 100%. Once you certify the cable as
>being good, then the port would probably be the problem. Hopefully it
>will be the cable...helluva lot cheaper!
>
>-Michael Vaughan
>Senior Network Engineer
>Predator-Hunter.com Inc.
>[EMAIL PROTECTED]
>
>
> -----Original Message-----
> From: Mike Mandulak
> Sent: Tue 8/7/2001 8:52 AM
> To: [EMAIL PROTECTED]
> Cc:
> Subject: Re: Switch port failure on 3548 [7:15089]
>
>
>
> The only way I can think that it would be a cable problem is if
>there was a
> short in the wire somewhere. Unplug the CAT5 from the suspect
>port, do a
> shut/no shut do you get the same result? Better still plug a PC
>into the
> port, does it stay up/up? Then plug a PC in another port with an
>FTP server
> on it and do some file transfers, then check for errors.
>
> MikeM
>
> ----- Original Message -----
> From: "Hans Stout"
> To:
> Sent: Tuesday, August 07, 2001 7:51 AM
> Subject: Switch port failure on 3548 [7:15089]
>
>
> > Hello colleagues,
> >
> > I have a Cisco 3548 switch and I suspect that one of the
>switch ports is
> not
> > working. All 48 ports have a CAT5 cable connection, and all
>ports are
> > patched to the respective wall outlets, there are no active
>users yet, so
> > all the ports are down/down. When I do a shut/no shut on all
>the ports, I
> > can see in the log that all ports except one show that the
>port goes up
> and
> > then down. To my best knowledge, the fact that the port goes
>up/down after
> a
> > shut/no shut shows that the port is ok. The port that doesn't
>work goes
> down
> > right away. My question is: does this mean that the actual
>physical switch
> > port is defective, or that the CAT5 cable attached to the
>switch isn't
> > working, or that something on the path from the switch port to
>the wall
> > outlet isn't working ?
> > Thanks for your help in advance !
> >
> > Regards,
> > Hans
> >
> >
>_________________________________________________________________
> > Get your FREE download of MSN Explorer at
>http://explorer.msn.com/intl.asp
>[EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15106&t=15089
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]