I'm a bit behind in my reading of emails, so apologies if this has been
addressed.
The company I work for is a Sprint partner, and we sell FR as well as other
Sprint products. I have worked with Sprint alot, and we generally sell 0 CIR
with all but voice PVCs, and we have no problems at all, occasionallt there
are a few dropped packets, but that is uncommon. I have seen PVC's with 6
months worth of counters and under 100 dropped packets, over 35% average
utilization.
With voice circuits, I have not had any problems either. We had a Sprint
direct customer, didnt know what they were doing, ordered 2 PVCs, 1 voice
and 1 data, both 0 CIR and had no problems.
Scott Meyer
CCNA, CCDA, MCSE, etc
[EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Trang D. Nguyen
Sent: Wednesday, August 08, 2001 9:18 PM
To: [EMAIL PROTECTED]
Subject: Re: DE bits [7:15210]
Brian,
As far as I know, Sprint only sells CIR 0. They don't commit anything to
you.
Trang
----- Original Message -----
From: Brian
To:
Sent: Wednesday, August 08, 2001 10:06 AM
Subject: Re: DE bits [7:15210]
> I doubt the cir is set to zero, it almost certainly is set to a value
below
> the 1.5 meg value, I'd suspect 768k perhaps. Whomever is the circuit
owner
> can call the telco to find out.
>
> Brian
>
> ----- Original Message -----
> From: "Mike Mandulak"
> To:
> Sent: Tuesday, August 07, 2001 9:16 PM
> Subject: DE bits [7:15210]
>
>
> > Do discard Eligible bits (DE) get set on lines that are full T1's? The
> > circuit I'm looking at is a full T1 to one of my internet providers and
> when
> > looking at the frame stats (using cisco LMI) I see that that the cir is
> set
> > to zero which would mean that all frames leave my site with the DE bit
> set.
> > Am I misunderstanding this?
> >
> > MikeM
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16233&t=15210
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
