That is enough for Layer 2 switching, trunking, FastEthernChannel, VLAN,
PVLAN. But you will need MSF or MSFC to test layer 3 switching.
Eric
""Sanjay Chaudhry"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Everyone,
> I'm trying to buy a refurbished switch with the following
> specifications:
>
> =====================================================
> Cisco Catalyst 5505 w/ Supervisor Engine II WS-X5506
>
> Included in the Chassis:
>
> One WS-C5505 Chassis 5 slot Chassis
> 1 Supervisor Engine II (WS-X5506)
>
> 1 AC Power Supply
> 1 12 PORT 100BaseTX Ethernet (WS-X5113)
> 1 AC Cord
> 1 Console Kit
> =====================================================
>
> There is no guarantee against DOA from seller. I'll be responsible for
> everything after the sale!!
> I'm a recent CCNA. This is intended for my CCNP/CCIE lab. I'll need your
> advice here... I don't even know if Flash/RAM should have been mentioned
> in the switch specs and are missing...
> Your input is highly valued.
> Thanks,
> Sanjay
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17058&t=17045
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
