Yes, that is the exact IOS I have on them. I will play around with that
method you suggested. I am going to upgrade them anyway, so it is a moot
point, but I want to see if I can get it to work. In response to someone
elses question, Ray, you asked how I got the framing around the banner, I am
assuming you mean the asterisks. All you have to do is put asterisks in
around the entire banner, there is no special command or anything, just
characters like anything else. Thanks to everyone who posted a response to
this question.
-----Original Message-----
From: Ednilson Rosa
To: [EMAIL PROTECTED]
Sent: 8/25/01 11:16 PM
Subject: Re: banner motd [7:17204]
Just one question: the routers on which I had this problem were 1270
with
12.0(3)T3 IP Plus IOS. Do you have something like this?
Ednilson Rosa
----- Original Message -----
From: "Ednilson Rosa"
To: "Lupi, Guy" ; "Group Study"
Sent: Saturday, August 25, 2001 11:50 PM
Subject: Re: banner motd [7:17204]
Yes, there is a work around for this!!! I had this exact problem on some
routers of a network and what I did to overcome it was to crate two
banners,
one MOTD BANNER and another LOGIN BANNER. As LOGIN banners are presented
right after MOTD banners, the trick is to make the LOGIN banner start
exactly where the MOTD one finishes, like this:
banner motd ^C
************************************************************************
* !!!!! WARNING !!!!! *
* *
* This is a private system. Unauthorized access is prohibited by law. *
* *
^C
banner login ^C
* Violators may be prosecuted. If you are not authorized *
* *
* to access this system, please disconnect now. *
* *
************************************************************************
^C
You probably will have to make some tries until it gets exactly want you
want but you may be able to get it!
Regards,
Ednilson Rosa
----- Original Message -----
From: "Lupi, Guy"
To:
Sent: Saturday, August 25, 2001 7:31 PM
Subject: RE: banner motd [7:17204]
A code upgrade definitely fixes it, I was just wondering if anyone knew
of a
way around it. Probably not, but I thought it would be interesting to
ask.
Thanks.
-----Original Message-----
From: Rob Robinson
To: [EMAIL PROTECTED]
Sent: 8/25/01 5:48 PM
Subject: RE: banner motd [7:17204]
Have you tried a code upgrade? We had a situation where a 4906 Switch
displayed the same behavior...only displayed the partial banner. It's
code
version only allowed a certain number of characters in the banner.
Upgrade
to latest IOS fixed it.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Lupi, Guy
Sent: Saturday, August 25, 2001 3:20 PM
To: [EMAIL PROTECTED]
Subject: RE: banner motd [7:17204]
Should have done that in the first email, here it is. Like I said,
works on
all my other routers, just not on the ones running Version 12.0(3)T3.
Thanks.
banner motd x
************************************************************************
* !!!!! WARNING !!!!! *
* *
* This is a private system. Unauthorized access is prohibited by law. *
* *
* Violators may be prosecuted. If you are not authorized *
* *
* to access this system, please disconnect now. *
* *
************************************************************************
x
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17351&t=17204
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]