Don't forsget:
if this is a lower platform, like 1600, you might have problems with
multilinking 2 serial connections.
Anyhow, this config that you have is wrong, because you are obviously not
using PRI interfaces. If you were using them, dialer interface would be the
perfect solution.
What you need is so called Virtual Template.
Go to cisco.com and do search on configuring Virtual Template, that will
explain everything.
Regards,
Dragi
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17379&t=17367
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
