Hey everybody,
I have a couple of 3102 routers at home that I can not get into. The console
ports have been set to some strange setting I can not seem to figure out.
I've tried what seems to be an endless combination of speeds, parity, stop
bits, data bits, etc..., but still get garbled data out the console. I have
other 3102s in my lab, so I know I've got good cables and all that. Plus, if
I have a TFTP server going when I power them up they will download IOS from
it, so I know they are working, just can't get into the damn console!
Is there anyway to manually/physically clear NVRAM so the console is set
back to 9600,n,8,1?
Help!
-Adam
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17743&t=17743
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
