People are going to tell you that you have a bad terminal package but I
don't think thats it. Can you get into rommon, if you can run the router
with 0x2141. If you still get garbled console you may want to try and load a
small image. I once loaded a very large image on a 1600 and starting
recieveing garbled messages. I had to send it back to cisco the TAC guy on
the phone said that this can happen sometimes when there is not enough
memory for the expanding image. It will even negate displaying the rommon
functionality, which really surprised me.
----- Original Message -----
From: "Adam Luy"
To:
Sent: Wednesday, August 29, 2001 1:37 PM
Subject: Password recovery when console it hosed [7:17743]
> Hey everybody,
>
> I have a couple of 3102 routers at home that I can not get into. The
console
> ports have been set to some strange setting I can not seem to figure out.
> I've tried what seems to be an endless combination of speeds, parity, stop
> bits, data bits, etc..., but still get garbled data out the console. I
have
> other 3102s in my lab, so I know I've got good cables and all that. Plus,
if
> I have a TFTP server going when I power them up they will download IOS
from
> it, so I know they are working, just can't get into the damn console!
>
> Is there anyway to manually/physically clear NVRAM so the console is set
> back to 9600,n,8,1?
>
> Help!
>
> -Adam
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17866&t=17743
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
