I have a 2924 with all ports on VLAN1 and VLAN1 set with an IP address on
network 10.0.0.0/8.
I was not using more than half the ports, so I created a VLAN13 and moved
ports 17 thru 24 over on it.
So far, so good.
Now, I wanted to give VLAN13 an IP address on network 192.168.0.0/24 so I
can telnet to it if on one of the computers connected to VLAN13 on that LAN,
but the VLAN13 keeps being in SHUTDOWN mode even if I do a conf t, int
vlan13, no shut.
What am I missing here?
Thanks and have a great weekend,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19050&t=19050
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
