If you do not want to use VLAN 1 for managment then you must shut it
down. Then VLAN 13 will pop up. It's not intuitive but it's how it
works.
Dave
Ole Drews Jensen wrote:
>
> I have a 2924 with all ports on VLAN1 and VLAN1 set with an IP address on
> network 10.0.0.0/8.
>
> I was not using more than half the ports, so I created a VLAN13 and moved
> ports 17 thru 24 over on it.
>
> So far, so good.
>
> Now, I wanted to give VLAN13 an IP address on network 192.168.0.0/24 so I
> can telnet to it if on one of the computers connected to VLAN13 on that
LAN,
> but the VLAN13 keeps being in SHUTDOWN mode even if I do a conf t, int
> vlan13, no shut.
>
> What am I missing here?
>
> Thanks and have a great weekend,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> http://www.RouterChief.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19055&t=19050
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]