Do you have anything attached to Port 13? The ports on the two 2924's on my
network are in the down status unless a device is attached.
David Toalson
816-701-4142
> ----------
> From: Ole Drews Jensen[SMTP:[EMAIL PROTECTED]]
> Reply To: Ole Drews Jensen
> Sent: Friday, September 07, 2001 3:32 PM
> To: [EMAIL PROTECTED]
> Subject: IP address on two VLAN's [7:19050]
>
> I have a 2924 with all ports on VLAN1 and VLAN1 set with an IP address on
> network 10.0.0.0/8.
>
> I was not using more than half the ports, so I created a VLAN13 and moved
> ports 17 thru 24 over on it.
>
> So far, so good.
>
> Now, I wanted to give VLAN13 an IP address on network 192.168.0.0/24 so I
> can telnet to it if on one of the computers connected to VLAN13 on that
> LAN,
> but the VLAN13 keeps being in SHUTDOWN mode even if I do a conf t, int
> vlan13, no shut.
>
> What am I missing here?
>
> Thanks and have a great weekend,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> http://www.RouterChief.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19053&t=19050
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
