Yes it does have a SC interface. And that is the one that I am trying to
telnet into.
Default gateway is RSM.
"Wilson, Bradley" wrote:
> This is just a guess, but doesn't the switch have an sc0 interface, even if
> it does have an RSM installed? If so, does the sc0 have an IP address and
> default gateway (probably the RSM) set?
>
> BJ
>
> -----Original Message-----
> From: khramov [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 13, 2001 9:47 AM
> To: [EMAIL PROTECTED]
> Subject: 5505 [7:19754]
>
> I've got a 5505 and I can not telnet into the switch portion of it from
> my work station. To get into it I have ot telnet into RSM module first
> and from there I telnet into the switch intself. I check 5505 it does
> not have an ip permit list configured on it. So why I can not telnet
> into the switch.
>
> Regards,
> Alex Khramov
>
> [GroupStudy.com removed an attachment of type text/x-vcard which had a name
> of khramov.vcf]
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of khramov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19763&t=19754
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
