Most likely you are on a different VLAN than your sup, try
set ip route default gateway will be the VLAN on the RSM
that you sup card is part of.
Dave
khramov wrote:
>
> I've got a 5505 and I can not telnet into the switch portion of it from
> my work station. To get into it I have ot telnet into RSM module first
> and from there I telnet into the switch intself. I check 5505 it does
> not have an ip permit list configured on it. So why I can not telnet
> into the switch.
>
> Regards,
> Alex Khramov
>
> [GroupStudy.com removed an attachment of type text/x-vcard which had a name
> of khramov.vcf]
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19787&t=19754
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]