Hm... my topology messed up with the line swapping. Here it goes again:
-------------------------------------
video conf. camera
|
Ethernet0
|
Router
|
VIC-2BRI-NT/TE
|
ISDN cloud
|
ISDN video conf. camera
--------------------------------
""Thomas N."" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Sorry I missed my topology:
>
>
> ISDN video conf. camera
>
> |
> Video conf. camera ---Ethernet0-Router-VIC-2BRI-NT/TE----ISDN
> cloud-------ISDN video conf. camera
>
> |
>
> AT&T MCU
>
>
> Can my IP conf. video camera talk with ISDN video conf. camera using this
> VIC-2BRI-NT/TE module?
>
>
>
>
> ""Thomas N."" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi All,
> >
> > In my lab scenario, I have an conference video camera that is connected
to
> > the LAN. On the router, I have a 2600 router with a VIC-2BRI-NT/TE
> module.
> > This VIC-2BRI-NT/TE mdule is then connected to the a MCU from the ISP
> > provider for video conference (say, AT&T). Do you think it is possible
to
> > implement so that my video conference camera can call the ISP MCU with
> ISDN
> > lines using the gateway mdule VIC-2BRI-NT/TE? Thanks!!!
> >
> > Thomas N.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19907&t=19905
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
