Thomas does the camera use h323 across the network? if so it should be
possible, I'd be interested to here if it works
cheers
""Thomas N."" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hm... my topology messed up with the line swapping. Here it goes again:
>
> -------------------------------------
> video conf. camera
> |
> Ethernet0
> |
> Router
> |
> VIC-2BRI-NT/TE
> |
> ISDN cloud
> |
> ISDN video conf. camera
>
> --------------------------------
>
>
>
>
>
> ""Thomas N."" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Sorry I missed my topology:
> >
> >
> > ISDN video conf. camera
> >
> > |
> > Video conf. camera ---Ethernet0-Router-VIC-2BRI-NT/TE----ISDN
> > cloud-------ISDN video conf. camera
> >
> > |
> >
> > AT&T MCU
> >
> >
> > Can my IP conf. video camera talk with ISDN video conf. camera using
this
> > VIC-2BRI-NT/TE module?
> >
> >
> >
> >
> > ""Thomas N."" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi All,
> > >
> > > In my lab scenario, I have an conference video camera that is
connected
> to
> > > the LAN. On the router, I have a 2600 router with a VIC-2BRI-NT/TE
> > module.
> > > This VIC-2BRI-NT/TE mdule is then connected to the a MCU from the ISP
> > > provider for video conference (say, AT&T). Do you think it is
possible
> to
> > > implement so that my video conference camera can call the ISP MCU with
> > ISDN
> > > lines using the gateway mdule VIC-2BRI-NT/TE? Thanks!!!
> > >
> > > Thomas N.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19916&t=19905
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]