I've got an ISDN PRI back at the home office and 6 routers that dial into for backups via their ISDN BRI connections. I have been told by my service provider that I can use two switched 56K channels off of an existing T1 at another site to dial into the ISDN PRI. I have been looking to try and find some kind of sample configuration to do this. I'm not even sure how this would work. Could anyone steer me in the right direction? I have searched through Cisco's web site, without much success and TAC is still researching it for me, but I'm not sure they are confident it can be done. The remote site router has a 2600 series router with a WIC DSU T1 card. The home office has a 3600 with an ISDN PRI card.
Thanks! Rob Michel [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21551&t=21551 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]